센서 > e2v Gas Sensor Evaluation Kits

TODAY360 TOTAL2,431,331
사이트 이용안내
Login▼/회원가입
최신글보기 질문게시판 기술자료 동영상강좌

아두이노 센서 ATMEGA128 PWM LED 초음파 AVR 블루투스 LCD UART 모터 적외선


BASIC4MCU | 센서 | 가스센서 | e2v Gas Sensor Evaluation Kits

페이지 정보

작성자 키트 작성일2017-08-29 14:20 조회1,809회 댓글0건

본문

e2v Gas Sensor Evaluation Kits

Our evaluation kits offer a low cost way of getting started quickly in gas sensing. Using an evaluation kit can save months of development time and cost by providing a fully working PCB and software to drive and monitor the gas sensors of your choice. 

Each kit is microprocessor controlled with a USB interface and comes complete with PC application software on CD for data logging and set-up. A universal mains adapter and USB lead is also provided. Gas sensors should be ordered separately.

Evaluation Kits are available for:

  • Metal Oxide Semiconductor Gas Sensors (MICS-EK1)
  • Infrared Gas Sensors (IR-EK2)

 

MICS-EK1: Evaluation Kit for Metal Oxide Semiconductor Gas Sensors

  • Operates two 4 pin leaded sensorsMEMs evaluation kit
  • Operates one 10 pin surface mount sensor (single or dual) with additional adapter PCB (order separately)
  • Automatic measuring of sensor resistance changes
  • Automatic load resistor switching
  • Settable heater drive levels
  • Ambient temperature monitoring
  • Provision for humidity sensor (customer fit)
  • Expansion header for additional applications


Accessories 

MICS-SMD-PCB5
A set of 5 adapter PCBs to allow a 10 pin surface mount sensor (single or dual) to be used with the MICS-EK1 Evaluation Kit. Each board is pinned on the underside for plugging into the two sensor sockets on the Evaluation Kit. On the topside are pads for the user to solder down a 10 pin surface mount gas sensor.

METAL-OXIDE-KIT
A set of 3 Metal Oxide Gas Sensors for evaluation and experimentation: MICS-2610 (Ozone), MICS-2710 (NO2) and MICS-5521 (CO/VOC).

Downloads

Datasheet
User Guide (V1)
Firmware (V1.01)
PC Software (V1.0 available for download soon)


IR-EK2: Evaluation Kit for Infrared Gas Sensors
  • Operates 6 or 7 pin (single gas) sensorsIR sensor evaluation kit
  • Operates 8 pin (twin gas) sensors
  • Calibrates sensors and monitors gas concentration levels
  • Adjustable bulb drive voltage (3.0V to 5.0V)
  • Adjustable reference and active channel gains
  • 16 bit Analog to Digital Conversion (ADC) for reference and active channels
  • Monitor gas sensor temperature on devices with integrated thermistor or IC temperature sensor
  • PCB mounted temperature sensor IC provided for devices without integrated temperature monitoring
  • Expansion header for additional applications
  • Supplied with gas flow hood


Accessories

IR-GAS-SENSOR-KIT
A set of 2 Infrared Gas Sensors for evaluation and experimentation: IR11BD (CO2) and IR12BD (Hydrocarbons)

IR-TWIN-GAS-KIT
One IR15TT Twin Gas Sensor (CO2 and Hydrocarbons).
 

Downloads

Datasheet
User Guide (V1)
Firmware (V1.00)
PC Software (V1.0 available for download soon)


ECVQ - EK3: Evaluation kit for Electrochemical and Pellistor gas sensors:

  • For use with the e2v range electrochemical gas sensors
  • For use with e2v pellistor/thermal conductivity gas sensors: Individual bead pairs, VQ500 series heads, VQ600 series heads
  • Simple control and set-up of sensors
  • USB interface to a Personal Computer (PC)
  • Free PC application software for easy control and data logging
  • Adjustable pellistor bridge voltage (1.6 V to 4.6 V)
  • Adjustable electrochemical bias voltage (-700mV to +350mV)
  • 16-bit Analog to Digital Conversion (ADC) for sensor outputs
  • Calibrate sensors with linear response and monitor gas concentration levels
  • PCB mounted temperature sensor IC
  • Four configurable alarm outputs
  • Two configurable analog outputs (12-bit DAC)
  • Four digital inputs
  • Expansion header for additional applications
  • JTAG header for user software upload
  • Supplied with universal mains adapter
  • Supplied with user manual on CD

 
Accessories

JAS767906AA
Standard Gas Flow Hood for VQ500 series, Infrared mini-sensors and electrochemical (nonreactive
gas) sensors

JAS769638AA
Premium Gas Flow Hood recommended for reactive gases e.g. H2S, NO2, Cl2, ClO2, ETO

Downloads

Datasheet
User Guide (V2)
Firmware (V01.02)

http://www.e2v.com/products-and-services/instrumentation-solutions/gas-sensors/gas-sensors-evaluation-kits/ 

댓글 0

조회수 1,809

등록된 댓글이 없습니다.

센서HOME > 센서 > 가스센서 목록

게시물 검색

2022년 1월 2월 3월 4월 5월 6월 7월 8월 9월 10월 11월 12월
2021년 1월 2월 3월 4월 5월 6월 7월 8월 9월 10월 11월 12월
2020년 1월 2월 3월 4월 5월 6월 7월 8월 9월 10월 11월 12월
2019년 1월 2월 3월 4월 5월 6월 7월 8월 9월 10월 11월 12월
2018년 1월 2월 3월 4월 5월 6월 7월 8월 9월 10월 11월 12월
Privacy Policy
MCU BASIC ⓒ 2020
모바일버전으로보기