페이지 정보작성자 master 작성일2018-03-15 14:32 조회1,316회 댓글0건
STM32 MCU Eval Tools
ST's tools for evaluation of the STM32, range from highly affordable community enabled tools up to fully equipped boards, ready for evaluation of every single feature of the selected MCU. All ST evaluation boards include an ST-LINK/V2 in-circuit debugger/programmer.
STM32 Nucleo boards follow a lean approach and are ideal for prototyping and community usage. An Arduino™connector and the ST Morpho connector make an extension with application related add-on hardware easy. All I/Os of the MCU are easily accessible, the boards come with a HAL library and work with IAR, Keil, CCC based IDEs as well as the mbed™ online IDE.
STM32 Discovery kits are a cheap and complete approach for evaluation of the outstanding capabilities of STM32 MCUs. They carry the necessary components, like MEMS microphones, sensors, LCD displays) for demonstration of specific device features. Evaluation and prototyping are facilitated by a HAL library and software examples, IAR, Keil and CCC based IDEs are supported.
STM32 Eval boards, the high end evaluation platform, carry all the required external hardware necessary for using the complete features set of an STM32 Microcontroller. STM32 Eval boards give access to all the pins of the contained microcontroller, even for bigger packages. The HAL library and ready-to-use software examples make application design very easy.
This comprehensive portfolio of evaluation boards is complemented by a wide choice of STM32 evaluation boards developed by ST’s partners.
STM32 MCU Discovery Kits
STM32 Discovery kits are a cheap and complete solution for the evaluation of the outstanding capabilities of STM32 MCUs. They carry the necessary infrastructure for demonstration of specific device characteristics, a HAL library and comprehensive software examples allow to fully benefit from the devices features and added values.
Extension connectors give access to most of the device’s I/Os and make the connection of add-on hardware possible.
With the integrated debugger/programmer the discovery kits are ideal for prototyping.http://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-tools/stm32-mcu-eval-tools/stm32-mcu-discovery-kits.html?querycriteria=productId=LN1848
32L152CDISCOVERYDiscovery kit with STM32L152RC MCU
The STM32L-DISCOVERY and 32L152CDISCOVERY kits help you to discover the STM32L ultra low power features and to develop and share your applications.
They are based on an STM32L152RBT6 and an STM32L152RCT6, respectively; and include an ST-LINK/V2 embedded debugging tool interface, an LCD (24 segments, 4 commons), LEDs, pushbuttons, a linear touch sensor or touchkeys.
- STM32L152RBT6 (128 KB Flash memory, 16 KB RAM, 4 KB EEPROM) or STM32L152RCT6 (256 KB Flash memory, 32 KB RAM, 8 KB EEPROM) microcontroller in an LQFP64 package
- On-board ST-LINK/V2 with selection mode switch to use the kit as a standalone ST-LINK/V2 (with SWD connector for programming and debugging)
- Board power supply: through USB bus or from an external 3.3 or 5 V supply voltage
- External application power supply: 3 V and 5 V
- IDD current measurement
- DIP28 package
- 24 segments, 4 commons
- Four LEDs:
- LD1 (red/green) for USB communication
- LD2 (red) for 3.3 V power-on
- Two user LEDs, LD3 (green) and LD4 (blue)
- Two pushbuttons (user and reset)
- One linear touch sensor or four touchkeys
- Extension header for LQFP64 I/Os for quick connection to prototyping board and easy probing
- Comprehensive free software including a variety of examples, part of STSW-STM32072 package
SAMPLE & BUY
QUALITY & RELIABILITY
Part Number RoHS Compliance Grade Material Declaration** STM32L152C-DISCO Ecopack1
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
등록된 댓글이 없습니다.